Strike Industries Glock Compensator - **The Mass Driver Comp is designed to work with unthreaded pipes. However, it is compatible with most aftermarket GLOCK™ threaded barrels. Strike Industries has tested the most popular brands on the market including: AlphaWolf, Battle Arms Development, Bear Creek Arsenal, Brownells, CMC Triggers, Faxon Firearms, Fortis Manufacturing, Gray Ghost Precision, Killer Innovations, LANTAC, Lone Wolf Distributors, Armament next level, Shadow Systems, Suarez International, Tactical Kinetics, ZEV Technologies.
**OEM GLOCK™ and Strike Industries slides designed and factory tested. Proper fit and application to third-party slides and frames cannot be guaranteed. Performance may vary when using third-party GLOCK™ components.
Strike Industries Glock Compensator
When you're ready to step away from the crowd and lead, Strike Industries and Wing Tactical have the Glock Gen 4 Comp you need. The Strike Industries Mass Driver Comp pistols for the Gen 4 Glock are an idea whose time has come.
Mass Driver Comp For Gen3, Gen4 Or Gen5 Glock™
It's not like the baffles and doors don't do their job. They're really doing their best to mitigate recoil and muzzle lift, given the way they work. There's only so much you can do to redirect the gas and make a positive impact. The problem is that these traditional compensators increase the reciprocating mass of the gun when fired. Since the mass of a Glock is relatively small, adding a compensator can add a significant percentage of additional alternative mass and create even more perceived recoil and movement that negatively affects control. Strike Industries knows we can do better.
The Strike Industries Mass Driver Comp does its job of regulating the expulsion of gases in the fire, so that instead of moving back and forth with the main mass of the firearm, it reacts on its own, compensating for the backward movement. . This advanced counterweight helps equalize the reaction of the fired weapon.
The Mass Driver Comp from Strike Industries appears as a perfect addition to the Gen 4 Glock when it is at rest. It's not bulky or clunky, and your Glock Gen 4 fits no differently in the average holster than any other Glock with a clipper. The pros at Strike Industries did a great job with this one. This one offers cutting-edge performance and good looks in one.
This product is not manufactured, authorized, endorsed or guaranteed by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.
Carver Compensator Fits Gen 4 .40 S&w Black
"GLOCK" is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Wing Tactical, LLC nor this website is in any way affiliated with or endorsed by GLOCK, Inc. or GLOCK Ges.m.b.H. The use of "GLOCK" on this page is only to advertise the sale of GLOCK pistols, parts or components. For more genuine GLOCK, Inc. products and parts. and GLOCK Ges.m.b.H, visit www.glock.com. We use cookies to improve your experience. In order to comply with the new ePrivacy directive, we need to ask for your consent to set cookies. To know more.
Strike Industries' Mass Driver Compensator (MDC) represents a quantum leap in compensator design. Today's designs have remained largely unchanged since the 1930s. It's time for something revolutionary. The name Mass Driver is inspired by the idea of theoretical mass engines in space travel. When mass is ejected, an equal and opposite reaction is generated propelling the rover forward. The Mass Driver Compensator is activated by the hot gases expelled from the barrel after the bullet is discharged and acts as a counterweight system to mitigate mechanical recoil. Barrel-mounted compensators add reciprocating mass and increase the moment of inertia of the operating system, which can have a negative effect on the reliable cycling of recoil-operated revolvers. By separating adjustment from operating components after power-up, the MDC enables near-original cycle speeds and reduces reciprocating mass. The MDC system compensator has a larger bore to reduce baffle hits and keyhole shots, along with a 2.5mm relief cut at the top of the rear to reduce "lips" and the damage to the bolt face of the gun.
Threaded Barrels: Yes, the Mass Driver Comp is compatible with most aftermarket GLOCK™ threaded barrels. We've tested most of the popular brands on the market, but not all. However, we recommend using it with non-threaded barrels if possible.
COMPATIBILITY: -For GLOCK™ GEN3, GEN4 or GEN5 G19 (compact) and G17 (standard) SLIDES.
Strike G4mdcompc Mass Driver Gen4 For Glock 19 Black Aluminum
NOTE: - The recommended torque value for the guide rod nut is 25 lbs/in. -Use with 9mm +P and +P+ ammo will cause premature inner spring wear and failure
2.5mm relief cut into top back of comp to reduce "throw" and slide face damage
Threaded Barrels: We recommend using non-threaded barrels if possible, but yes, the Mass Driver Comp is compatible with most aftermarket GLOCK™ threaded barrels. We test with the most popular brands on the market including: AlphaWolf, Battle Arms Development, Bear Creek Arsenal, Brownells, CMC Triggers, Faxon Firearms, Fortis Manufacturing, Gray Ghost Precision, Killer Innovations, LANTAC, Lone Wolf Distributors, Next Level Armament, Shadow Systems, Suarez International, Tactical Kinetics, ZEV Technologies.
NOTES: -OEM GLOCK™ and Strike Industries slides designed and tested at the factory -SI cannot guarantee proper fit and application to third party slides and frames -Recommended torque value for rod nut guide is 25 lbs/in. -Use with 9mm +P and +P+ ammo will cause premature innerspring wear and failure -Loctite® Threadlocker Blue 242® on all threads -Gun or gunsmith installation recommended -Tested product with factory GLOCK™ components - Performance may vary when using third-party compatible GLOCK™ components - consult a local gunsmith for any custom modifications during use with this product
Strike Industries G4 Mass Driver Slide Mounted Compensator For Glock Gen 4 Pistols (type: Standard / Glock 17)
COMPATIBILITY: -For GLOCK™ GEN3, GEN4 OR GEN5 G19 (compact) and G17 (standard) LIGHTWEIGHT -Features: SI Mass Driver Comp sits with OEM GLOCK™ slides and can be used in most open holsters that fit compensators
DISCLAIMER: -This product is not manufactured, authorized, endorsed or guaranteed by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols. --“GLOCK” is a federally registered trademark of GLOCK, Inc. and is one of many trademarks owned by GLOCK, Inc. and GLOCK Ges.m.b.H. Neither Strike Industries Inc. nor is this site in any way affiliated with or endorsed by GLOCK, Inc. The use of "GLOCK" on this page is only to advertise the sale of GLOCK pistols, parts or components. For additional products and parts from GLOCK, Inc. and Genuine GLOCK Ges.m.b.H, visit www.glock.com.
CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Sign up to receive updates on new arrivals, deals, be the first to hear popular back-in-stock notifications and discount information. **The Mass Driver Comp is designed to work with non-threaded barrels. However, it is compatible with most aftermarket GLOCK™ threaded barrels. Strike Industries has tested the most popular brands on the market including: AlphaWolf, Battle Arms Development, Bear Creek Arsenal, Brownells, CMC Triggers, Faxon Firearms, Fortis Manufacturing, Gray Ghost Precision, Killer Innovations, LANTAC, Lone Wolf Distributors, Armament next level, Shadow Systems, Suarez International, Tactical Kinetics, ZEV Technologies.
Strike Industries G3 Mass Driver Slide Mounted Compensator For Glock Gen 3 Pistols (type: Compact / Glock 19), Accessories & Parts, Real Steel Parts, Handgun
**OEM GLOCK™ and Strike Industries slides designed and factory tested. Proper fit and application to third-party slides and frames cannot be guaranteed. Performance may vary when using third-party GLOCK™ components.
We are in a routine. The firearms industry has defined compensators the same way for nearly every firearm for so long that we've almost forgotten there could be a better way to do things. Strike Industries has made it their mission to go beyond that status quo and their fitment treatment for the Gen 3 Glock proves it. The Strike Industries Mass Driver Comp isn't just another can strapped to the end of a barrel, this comp changes everything.
Traditional compensators are static, screwing directly into the barrel of the firearm. This means that when the gun is fired, the mass of the standard barrel-mounted compensator is just another addition to the mass that alternates as the firearm cycles. Simply put, this means a lot more weight when the gun is fired. This is especially a problem with pistols, where a Glock Gen 3 comp can make a significant addition to the overall mass of the gun.
Strike Industries isn't afraid to break the ranks. The Strike Industries design team knows when it's time to forge your own path. While the physics concept behind Mass Driver Comp has been around for years, this is new technology when it comes to comps.
Strike Industries Warhog Compensator, 5.56mm: Mgw
The Mass Driver Comp is mounted on an extended guide rod with a retractable spring. With this design, the compensator is independent of the barrel and body of the firearm and reacts to firing forces by acting as a counterweight by separating itself from the rest of the firearm. The compensator still mitigates motion through handling
Strike industries dust cover, strike industries mag extension, carver glock compensator, strike industries glock, strike industries cookie cutter, strike industries stock, strike industries glock locking block, strike industries cookie cutter compensator, strike industries strike switch, strike industries bolt catch, strike industries compensator, strike industries
0 Comments